Installation Guide
Table Of Contents
- ECS4810-12M Managed 12-Port Gigabit Ethernet Switch
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
C
HAPTER
1
| Introduction
Description of Hardware
– 29 –
PWR Green DC or AC power is functioning normally.
Off External power not connected or has failed.
Table 2: 1000 Mbps Port Status LEDs (1~12)
LED Condition Status
(1~12) On/Flashing Green Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
On/Flashing Amber Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
Off There is no valid link on the port.
Table 3: SFP Present Status LEDs (1~12)
LED Condition Status
(1~12) On Green The switch has detected an SFP with a valid link in
this port, the corresponding RJ-45 port will be
disabled.
Off There is no SFP present.
Table 1: System Status LEDs (Continued)
LED Condition Status