CLI Reference Guide-R05

Chapter 22 | Multicast Filtering Commands
MVR for IPv6
– 693 –
■
When a source port receives a query message, it will be forwarded to all
downstream receiver ports.
■
When a receiver port receives a query message, it will be dropped.
Example
The following example enable MVR6 proxy switching.
Console(config)#mvr6 proxy-switching
Console(config)#
Related Commands
mvr6 robustness-value (693)
mvr6
robustness-value
This command configures the expected packet loss, and thereby the number of
times to generate report and group-specific queries. Use the no form to restore the
default setting.
Syntax
mvr6 robustness-value value
no mvr6 robustness-value
value - The robustness used for all interfaces. (Range: 1-10)
Default Setting
2
Command Mode
Global Configuration
Command Usage
◆ This command sets the number of times report messages are sent upstream
when changes are learned about downstream groups, and the number of times
group-specific queries are sent to downstream receiver ports.
◆ This command only takes effect when MVR6 proxy switching is enabled.
Example
Console(config)#mvr6 robustness-value 5
Console(config)#
Related Commands
mvr6 proxy-switching (692)