CLI Reference Guide-R05

Chapter 22 | Multicast Filtering Commands
MVR for IPv6
– 688 –
mvr6
associated-profile
This command binds the MVR group addresses specified in a profile to an MVR
domain. Use the no form of this command to remove the binding.
Syntax
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR6 group
addresses. (Range: 1-21 characters)
Default Setting
Disabled
Command Mode
Global Configuration
mvr6 source-port-mode
dynamic
Configures the switch to only forward multicast streams
which the source port has dynamcially joined
GC
mvr6 upstream-source-ip Configures the source IP address assigned to all control
packets sent upstream
GC
mvr6 vlan Specifies the VLAN through which MVR6 multicast data is
received
GC
mvr6 immediate-leave Enables immediate leave capability IC
mvr6 type Configures an interface as an MVR6 receiver or source port IC
mvr6 vlan group Statically binds a multicast group to a port IC
clear mvr6 groups dynamic Clears multicast group information dynamically learned
through MVR6
PE
clear mvr6 statistics Clears the MVR6 statistics globally or on a per-interface basis. PE
show mvr6 Shows information about MVR domain settings, including
MVR6 operational status, the multicast VLAN, the current
number of group addresses, and the upstream source IP
address
PE
show mvr6
associated-profile
Shows the profiles bound the specified domain PE
show mvr6 interface Shows MVR settings for interfaces attached to the MVR6
VLAN
PE
show mvr6 members Shows information about the current number of entries in the
forwarding database, or detailed information about a specific
multicast address
PE
show mvr6 profile Shows all configured MVR6 profiles PE
show mvr6 statistics Shows MVR6 protocol statistics for the specified interface PE
Table 136: Multicast VLAN Registration for IPv6 Commands (Continued)
Command Function Mode