CLI Reference Guide-R05

Chapter 22 | Multicast Filtering Commands
MLD Snooping
– 642 –
ipv6 mld snooping This command enables MLD Snooping globally on the switch. Use the no form to
disable MLD Snooping.
Syntax
[no] ipv6 mld snooping
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following example enables MLD Snooping:
Console(config)#ipv6 mld snooping
Console(config)#
ipv6 mld snooping
unsolicited-report-interval
Specifies how often the upstream interface should
transmit unsolicited IGMP reports (when proxy reporting is
enabled)
GC
ipv6 mld snooping version Configures the MLD Snooping version GC
ipv6 mld snooping vlan
immediate-leave
Removes a member port of an IPv6 multicast service if a
leave packet is received at that port and MLD immediate-
leave is enabled for the parent VLAN
GC
ipv6 mld snooping vlan
mrouter
Adds an IPv6 multicast router port GC
ipv6 mld snooping vlan
static
Adds an interface as a member of a multicast group GC
clear ip igmp snooping
groups dynamic
Clears multicast group information dynamically learned
through MLD snooping or MVR6
PE
clear ip igmp snooping
statistics
Clears clears IGMP snooping statistics PE
show ipv6 mld snooping Displays MLD Snooping configuration PE
show ipv6 mld snooping
group
Displays the learned groups PE
show ipv6 mld snooping
group source-list
Displays the learned groups and corresponding source list PE
show ipv6 mld snooping
mrouter
Displays the information of multicast router ports PE
show ipv6 mld snooping
statistics
Shows IGMP snooping protocol statistics for the specified
interface
PE
Table 125: MLD Snooping Commands (Continued)
Command Function Mode