CLI Reference Guide-R05

Chapter 22 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 639 –
Console#show ip igmp profile 19
IGMP Profile 19
Deny
Range 239.1.1.1 239.1.1.1
Range 239.2.3.1 239.2.3.100
Console#
show ip igmp rate-
limit
This command shows the maximum rate at which IGMP membership reports can
be sent from an interface.
Syntax
show ip igmp rate-limit [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Using this command without specifying an interface displays information for all
interfaces.
Example
Console#show ip igmp rate-limit interface vlan 1
Interface Rate Limit (pps)
--------- ------------------
VLAN 1 255
Console#