CLI Reference Guide-R05

Table Of Contents
Chapter 19
| VLAN Commands
Configuring Protocol-based VLANs
– 554 –
Command Mode
Privileged Exec
Example
This shows protocol group 1 configured for IP over Ethernet:
Console#show protocol-vlan protocol-group
Protocol Group ID Frame Type Protocol Type
----------------- ---------- -------------
1 Ethernet 08 00
1 Ethernet 08 06
Console#
show interfaces
protocol-vlan
protocol-group
This command shows the mapping from protocol groups to VLANs for the selected
interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for protocol
group 1 will be mapped to VLAN 2:
Console#show interfaces protocol-vlan protocol-group
PrPort Protocol Group ID VLAN ID Priority
-------- ----------------- ------- -----------
Eth 1/ 2 1 2 0
Console#