CLI Reference Guide-R05

Chapter 11 | Interface Commands
Interface Configuration
– 388 –
Start Time Octets Input Discards Errors Unknown Proto
------------ --------------- ------------- ------------- -------------
00d 00:05:37 1400912 0 0 0
00d 00:06:37 1566090 0 0 0
00d 00:07:37 1754781 0 0 0
Start Time Octets Output Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 00:05:37 6827866 10563 2042 30
00d 00:06:37 7572668 12040 2362 30
00d 00:07:37 8548505 13380 2879 30
Start Time Octets Output Discards Errors
------------ --------------- ------------- -------------
00d 00:05:37 6827866 0 0
00d 00:06:37 7572668 0 0
00d 00:07:37 8548505 0 0
show interfaces status This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
Console#show interfaces status ethernet 1/1
Basic Information:
Port Type : 1000BASE-T
MAC Address : 70-72-CF-59-8F-41
Configuration:
Name :
Port Admin : Up
Speed-duplex : @uto
Capabilities : 10half, 10full, 100half, 100full, 1000full