CLI Reference Guide-R05

Chapter 11 | Interface Commands
Interface Configuration
– 385 –
show interfaces
history
This command displays statistical history for the specified interfaces.
show interfaces history [interface [name [current |
previous index count] [input | output]]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
name - Name of sample as defined in the history command.
(Range: 1-32 characters)
current - Statistics recorded in current interval.
previous - Statistics recorded in previous intervals.
index - An index into the buckets containing previous samples.
(Range: 1-96)
count - The number of historical samples to display. (Range: 1-96)
input - Ingress traffic.
output - Egress traffic.
Default Setting
Shows historical statistics for all interfaces, intervals, ingress traffic, and egress
traffic.
Command Mode
Privileged Exec
Utilization Statistics
Octets input per second Number of octets entering this interface in kbits per second.
Packets input per second Number of packets entering this interface in packets per second.
Input utilization The input utilization rate for this interface.
Octets output per second Number of octets leaving this interface in kbits per second.
Packets output per second Number of packets leaving this interface in packets per second.
Output utilization The output utilization rate for this interface.
Table 72: show interfaces counters - display description (Continued)
Parameter Description