CLI Reference Guide-R05

Chapter 4 | System Management Commands
Time Range
– 156 –
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets a time range for use by other functions, such as Access Control
Lists.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (343)
absolute This command sets the time range for the execution of a command. Use the no
form to remove a previously specified time.
Syntax
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
Default Setting
None
Command Mode
Time Range Configuration
Command Usage
◆ If a time range is already configured, you must use the no form of this
command to remove the current entry prior to configuring a new time range.