CLI Reference Guide-R05

Chapter 4 | System Management Commands
Time
– 149 –
Example
Console(config)#sntp server 10.1.0.19
Console#
Related Commands
sntp client (147)
sntp poll (148)
show sntp (149)
show sntp This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending time
synchronization requests, and the current SNTP mode (i.e., unicast).
Example
Console#show sntp
Current Time : Nov 5 18:51:22 2006
Poll Interval : 16 seconds
Current Mode : Unicast
SNTP Status : Enabled
SNTP Server : 137.92.140.80 0.0.0.0 0.0.0.0
Current Server : 137.92.140.80
Console#
Manual Configuration Commands
clock summer-time
(date)
This command sets the start, end, and offset times of summer time (daylight
savings time) for the switch on a one-time basis. Use the no form to disable
summer time.
Syntax
clock summer-time name date b-date b-month b-year b-hour
b-minute e-date e-month e-year e-hour e-minute [offset]
no clock summer-time
name - Name of the time zone while summer time is in effect,
usually an acronym. (Range: 1-30 characters)
b-date - Day of the month when summer time will begin.
(Range: 1-31)