CLI Reference Guide-R05

Chapter 4 | System Management Commands
File Management
– 124 –
ip tftp timeout This command specifies the time the switch can wait for a response from a TFTP
server before retransmitting a request or timing out for the last retry. Use the no
form to restore the default setting.
Syntax
ip tftp timeout seconds
no ip tftp timeout
seconds - The the time the switch can wait for a response from a
TFTP server before retransmitting a request or timing out.
(Range: 1-65535 seconds)
Default Setting
5 seconds
Command Mode
Global Configuration
Example
Console(config)#ip tftp timeout 10
Console(config)#