CLI Reference Guide-R05

Chapter 4 | System Management Commands
System Status
– 106 –
Related Commands
process cpu guard (212)
show running-config This command displays the configuration information currently in use.
Syntax
show running-config [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id (Range: 1-4094)
Command Mode
Privileged Exec
Command Usage
◆ Use the interface keyword to display configuration data for the specified
interface.
◆ Use this command in conjunction with the show startup-config command to
compare the information in running memory to the information stored in non-
volatile memory.
◆ This command displays settings for key command modes. Each mode group is
separated by “!” symbols, and includes the configuration mode command, and
corresponding commands. This command displays the following information:
■
MAC address for the switch
■
SNTP server settings
■
SNMP community strings
■
Users (names, access levels, and encrypted passwords)
■
VLAN database (VLAN ID, name and state)
Minimum Threshold If packet flow has been stopped after exceeding the maximum
threshold, normal flow will be restored after usaage falls beneath the
minimum threshold.
Trap Status Shows if an alarm message will be generated when utilization exceeds
the high watermark or exceeds the maxmimum threshold.
CPU Guard Operation
Current Threshold Shows the configured threshold in packets per second.
Table 12: show process cpu guard - display description
Field Description