ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
Precision Time Protocol
– 976 –
no spaces; or use a hyphen to designate a range of port
numbers. (Range: 1-28)
port-channel channel-id (Range: 1-8)
COMMAND MODE
Privileged Exec
EXAMPLE
This example shows PTP configuration settings, negotiated settings, and
default values for a boundary clock.
Console#show ptp information boundary
This Device is GrandMaster clock
Default Data Set:
Two Step Flag : Yes
Clock Identity : 0x00000CFFFE00FDFD
Number Ports : 2
Clock Quality :
Clock Class : 248
Clock Accuracy : Unknown
Offset Scaled Log Variance : -4000
Priority1 : 128
Priority2 : 128
Domain Number : 0
Slave Only : No
Current Data Set:
Steps Removed : 0
Offset From Master : 0 sec. 0 nano sec.
Mean Path Delay : 0 sec. 0 nano sec.
Parent Data Set:
Parent Identity
Clock Identity : 0X00000CFFFE0000FD
Port Number : 0
Observed Offset Scaled Log Variance : 65535
Observed Clock Phase Change Rate : 2147483647
Grandmaster Identity : 0X00000CFFFE0000FD
Grandmaster Clock Quality :
Clock Class : 248
Clock Accuracy : Unknown
Offset Scaled Log Variance : -4000
Grandmaster Priority1 : 128
Grandmaster Priority2 : 128
Time Properties Data Set:
Current UTC Offset : 0
Current UTC Offset Valid : No
Leap59 : No
Leap61 : No
Time Traceable : No
Frequency Traceable : No
PTP Timescale : Yes
Time Source : Internal Oscillator
Etherent 1/1 Port Data Set:
Port Identity :
Clock Identity : 00000CFFFE0000FD
Port Number : 1