ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
Precision Time Protocol
– 966 –
EXAMPLE
Console(config)#ptp priority1 64
Console(config)#
ptp priority2 This command sets a secondary preference level used in selecting the
master clock. Use the no form to restore the default setting.
SYNTAX
ptp priority2 priority-value
no ptp priority2
priority-value – Slave devices use the priority2 value when selecting
a master clock. (Range: 0-255)
DEFAULT SETTING
128
COMMAND MODE
Global Configuration
COMMAND USAGE
The priority2 preference is only considered when it not possible to use
priority1 and other clock attributes to select a best master clock.
EXAMPLE
Console(config)#ptp priority2 16
Console(config)#
ptp announce-
receipt-timeout
This command sets the transmit timeout for PTP announcement messages.
Use the no form to restore the default setting.
SYNTAX
ptp announce-receipt-timeout timeout-value
no ptp announce-receipt-timeout
timeout-value – The number of PTP announce message intervals
which have to expire without the receipt of a announce message
before the session times out. (Range: 2-10)
DEFAULT SETTING
3
COMMAND MODE
Interface Configuration (Ethernet, Port Channel)