ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
Event Logging
– 937 –
DEFAULT SETTING
Disabled
Level 7
COMMAND MODE
Global Configuration
COMMAND USAGE
◆ Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
◆ Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
EXAMPLE
Console(config)#logging trap 4
Console(config)#
clear log This command clears messages from the log buffer.
SYNTAX
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
DEFAULT SETTING
Flash and RAM
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear log
Console#
RELATED COMMANDS
show log (938)