ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
Event Logging
– 935 –
DEFAULT SETTING
Flash: errors (level 3 - 0)
RAM: debugging (level 7 - 0)
COMMAND MODE
Global Configuration
COMMAND USAGE
The message level specified for flash memory must be a higher priority
(i.e., numerically lower) than that specified for RAM.
EXAMPLE
Console(config)#logging history ram 0
Console(config)#
logging host This command adds a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
SYNTAX
[no] logging host host-ip-address
host-ip-address - The IPv4 or IPv6 address of a syslog server.
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
COMMAND USAGE
◆ Use this command more than once to build up a list of host IP
addresses.
◆ The maximum number of host IP addresses allowed is five.
4 warnings Warning conditions (e.g., return false, unexpected
return)
3 errors Error conditions (e.g., invalid input, default used)
2 critical Critical conditions (e.g., memory allocation, or free
memory error - resource exhausted)
1 alerts Immediate action needed
0 emergencies System unusable
Table 69: Logging Levels (Continued)
Level Severity Name Description