ECS4660-28F_Management Guide-R03

– 93 –
1 INTRODUCTION
This switch provides a broad range of features for Layer 2 switching and
Layer 3 routing. It includes a management agent that allows you to
configure the features listed in this manual. The default configuration can
be used for most of the features provided by this switch. However, there
are many options that you should configure to maximize the switch’s
performance for your particular network environment.
KEY FEATURES
Table 1: Key Features
Feature Description
Configuration Backup
and Restore
Using management station or FTP/TFTP server
Authentication Console, Telnet, web – user name/password, RADIUS, TACACS+
Port – IEEE 802.1X, MAC address filtering
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Teln e t – S S H
Web – HTTPS
General Security
Measures
AAA
ARP inspection
DHCP Snooping (with Option 82 relay information)
IP Source Guard
PPPoE Intermediate Agent
Private VLANs
Port Authentication – IEEE 802.1X
Port Security – MAC address filtering
Access Control Lists Supports up to 256 ACLs, up to 96 rules per ACL
DHCP Client, Relay, Server
DHCPv6 Client
DNS Client and Proxy service
Port Configuration Speed, duplex mode and flow control
Port Trunking Supports up to 8 trunks – static or dynamic trunking (LACP)
Port Mirroring 28 sessions, one or more source ports to one analysis port
Congestion Control Rate Limiting
Throttling for broadcast, multicast, unknown unicast storms