ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
General Commands
– 919 –
EXAMPLE
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- ----------
Unit 1:
ECS4660-28F_V1.2.1.4.bix OpCode N 2012-06-25 10:40:53 21627592
ECS4660-28F_V1.2.1.5.bix OpCode Y 2001-01-06 14:35:12 21627592
Factory_Default_Config.cfg Config N 2010-12-27 02:42:32 455
startup1.cfg Config Y 2001-01-04 19:22:08 1732
-----------------------------------------------------------------------------
Free space for compressed user config files: 2584576
Console#
umount usbdisk This command prepares the USB memory device to be safely removed
from the switch.
SYNTAX
umount usbdisk
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Before disconnecting USB memory devices, you must unmount them first.
This is similar to “Safely Remove Hardware” in Windows where the device
will not unmount until all data transfers have been finished.
EXAMPLE
Console#umount usbdisk
You can safely remove your usbdisk.
Console#
whichboot This command displays which files were booted when the system powered
up.
SYNTAX
whichboot
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec