ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
General Commands
– 918 –
EXAMPLE
This example shows how to delete the test2.cfg configuration file from
flash memory.
Console#delete file name test2.cfg
Console#
RELATED COMMANDS
dir (918)
delete public-key (1062)
dir This command displays a list of files in flash memory.
SYNTAX
dir {boot-rom: | config: | opcode: | usbdisk:} [filename]}
boot-rom
- Boot ROM (or diagnostic) image file.
config - Switch configuration file.
opcode - Run-time operation code image file.
usbdisk - System file on a USB memory stick or disk.
filename - Name of configuration file or code image. If this file
exists but contains errors, information on this file cannot be shown.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
◆ If you enter the command dir without any parameters, the system
displays all files.
File information is shown below:
Table 66: File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Create Time The date and time the file was created.
Size The length of the file in bytes.