ECS4660-28F_Management Guide-R03

C HAPTER 24 | System Management Commands
System Status
– 904 –
show process cpu This command shows the CPU utilization parameters, alarm status, and
alarm configuration.
COMMAND MODE
Normal Exec, Privileged Exec
EXAMPLE
Console#show process cpu
CPU Utilization in the past 5 seconds : 7%
CPU Utilization in the past 60 seconds
Average Utilization : 8%
Maximum Utilization : 9%
Alarm Status
Current Alarm Status : Off
Last Alarm Start Time : Jun 9 15:10:09 2011
Last Alarm Duration Time : 10 seconds
Alarm Configuration
Rising Threshold : 90%
Falling Threshold : 70%
Console#
RELATED COMMANDS
process cpu (1016)
show
running-config
This command displays the configuration information currently in use.
SYNTAX
show running-config
COMMAND MODE
Privileged Exec
COMMAND USAGE
◆ Use this command in conjunction with the show startup-config
command to compare the information in running memory to the
information stored in non-volatile memory.
◆ This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
■
MAC address for the switch
■
L2 Protocol Tunnel destination MAC
■
SNMP community strings
■
Users (names, access levels, and encrypted passwords)
■
VLAN database (VLAN ID, name and state)
■
VLAN configuration settings for each interface