ECS4660-28F_Management Guide-R03

C HAPTER 22 | Using the Command Line Interface
Entering Commands
– 877 –
◆ VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Table 55: Configuration Command Modes
Mode Command Prompt Page
Access
Control List
access-list arp
access-list ip standard
access-list ip extended
access-list ipv6 standard
access-list ipv6 extended
access-list mac
Console(config-arp-acl)
Console(config-std-acl)
Console(config-ext-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-mac-acl)
1181
1164
1164
1170
1170
1176
CFM ethernet cfm domain Console(config-ether-cfm) 1567
Class Map class-map Console(config-cmap) 1408
DHCP ip dhcp pool Console(config-dhcp) 1634
ERPS erps domain Console(config-erps) 1307
Interface interface {ethernet port | port-channel id|
vlan id}
Console(config-if) 1188
Line line {console | vty} Console(config-line) 924
MSTP spanning-tree mst-configuration Console(config-mstp) 1283
Policy Map policy-map Console(config-pmap) 1411
Time
Range
time-range Console(config-time-range) 957
Route Map route-map Console(config-route-map) 1899
Router router
{bgp | ipv6 ospf | ospf | pim | pim6 | rip}
Console(config-router) 1832
1792
1751
1928
1951
1734
Time
Range
time-range Console(config-time-range) 957
VLAN vlan database Console(config-vlan) 1343