ECS4660-28F_Management Guide-R03

C HAPTER 17 | IP Services
Forwarding UDP Service Requests
– 732 –
PARAMETERS
These parameters are displayed:
◆ Destination UDP Port – UDP application port for which UDP service
requests are forwarded. (Range: 1-65535)
The following UDP ports are included in the forwarding list when the
UDP helper is enabled, and a remote server address is configured:
BOOTP client port 67
BOOTP server port 68
Domain Name Service port 53
IEN-116 Name Service port 42
NetBIOS Datagram Server port 138
NetBIOS Name Server port 137
NTP port 37
TACACS service port 49
TFTP port 69
WEB INTERFACE
To specify UDP destination ports for forwarding:
1. Click IP Service, UDP Helper, Forwarding.
2. Select Add from the Action list.
3. Enter a destination UDP port number for which service requests are to
be forwarded to a remote application server.
4. Click Apply.
Figure 435: Specifying UDP Destination Ports
To show the configured UDP destination ports:
1. Click IP Service, UDP Helper, Forwarding.
2. Select Show from the Action list.