ECS4660-28F_Management Guide-R03

C HAPTER 17 | IP Services
Dynamic Host Configuration Protocol
– 725 –
N OTE : Be sure you exclude the address for this switch and other key
network devices.
WEB INTERFACE
To configure IP addresses excluded for DHCP clients:
1. Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3. Select Add from the Action list.
4. Enter a single address or an address range.
5. Click Apply.
Figure 428: Configuring Excluded Addresses on the DHCP Server
To show the IP addresses excluded for DHCP clients:
1. Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3. Select Show from the Action list.
Figure 429: Showing Excluded Addresses on the DHCP Server