ECS4660-28F_Management Guide-R03

C HAPTER 15 | Multicast Filtering
Layer 2 IGMP (Snooping and Query for IPv4)
– 618 –
◆ Type (Show Current Multicast Router) – Shows if this entry is static or
dynamic.
◆ Expire (Show Current Multicast Router) – Time until this dynamic entry
expires.
WEB INTERFACE
To specify a static interface attached to a multicast router:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Add Static Multicast Router from the Action list.
3. Select the VLAN which will forward all the corresponding multicast
traffic, and select the port or trunk attached to the multicast router.
4. Click Apply.
Figure 341: Configuring a Static Interface for an IPv4 Multicast Router
To show the static interfaces attached to a multicast router:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Show Static Multicast Router from the Action list.
3. Select the VLAN for which to display this information.