ECS4660-28F_Management Guide-R03

C HAPTER 10 | Class of Service
Layer 2 Queue Settings
– 308 –
weighted service for the remaining queues. Use this parameter to
specify the queues assigned to use strict priority. (Default: Disabled)
◆ Weight – Sets a weight for each queue which is used by the WRR
scheduler. (Range: 1-15; Default: Weights 1, 2, 4, 6, 8, 10, 12 and 14
are assigned to queues 0 - 7 respectively)
WEB INTERFACE
To configure the queue mode:
1. Click Traffic, Priority, Queue.
2. Select a port or trunk.
3. Set the queue mode.
4. If the weighted queue mode is selected, the queue weight can be
modified if required.
5. If the queue mode that uses a combination of strict and weighted
queueing is selected, the queues which are serviced first must be
specified by enabling strict mode parameter in the table.
6. Click Apply.
Figure 134: Setting the Queue Mode (Strict)
Figure 135: Setting the Queue Mode (WRR)