ECS4660-28F_Management Guide-R03

C HAPTER 6 | VLAN Configuration
Private VLANs
– 239 –
To configure primary/secondary associated groups, follow these steps:
1. Use the Configure VLAN (Add) page to designate one or more
community VLANs, and the primary VLAN that will channel traffic
outside of the VLAN groups.
2. Use the Configure VLAN (Add Community VLAN) page to map a
community VLAN to the primary VLAN.
3. Use the Configure Interface page to set the port type to promiscuous
(i.e., having access to all ports in the primary VLAN), or host (i.e.,
having access restricted to community VLAN members, and channeling
all other traffic through promiscuous ports). Then assign any
promiscuous ports to a primary VLAN and any host ports a community
VLAN.
CREATING
PRIVATE VLANS
Use the VLAN > Private (Configure VLAN - Add) page to create primary or
community VLANs.
CLI REFERENCES
◆ "private-vlan" on page 1367
PARAMETERS
These parameters are displayed in the web interface:
◆ VLAN ID – ID of configured VLAN (1-4094).
◆ Type – There are two types of private VLANs:
■
Primary – Conveys traffic between promiscuous ports, and to
community ports within secondary (or community) VLANs.
■
Community - Conveys traffic between community ports, and to
their promiscuous ports in the associated primary VLAN.
WEB INTERFACE
To configure private VLANs in the web interface:
1. Click VLAN, Private.
2. Select Configure VLAN from the Step list.
3. Select Add from the Action list.
4. Enter the VLAN ID to assign to the private VLAN.
5. Select Primary or Community from the Type list
6. Click Apply.