ECS4660-28F_Management Guide-R03

Table Of Contents

HAPTER

| VLAN Configuration

IEEE 802.1Q VLANs

– 233 –

OTE

VLAN 1 is the default untagged VLAN containing all ports on the

switch.

Edit Member by Interface

All parameters are the same as those described under the preceding

section for Edit Member by VLAN.

Edit Member by Interface Range

All parameters are the same as those described under the earlier section

for Edit Member by VLAN, except for the items shown below.

◆ Port Range – Displays a list of ports. (Range: 1-28)

◆ Trunk Range – Displays a list of ports. (Range: 1-8)

OTE

The PVID, acceptable frame type, and ingress filtering parameters

for each interface within the specified range must be configured on either

the Edit Member by VLAN or Edit Member by Interface page.

WEB INTERFACE

To configure static members by the VLAN index:

1. Click VLAN, Static.

2. Select Edit Member by VLAN from the Action list.

3. Select a VLAN from the scroll-down list.

4. Set the Interface type to display as Port or Trunk.

5. Modify the settings for any interface as required.

6. Click Apply.