ECS4660-28F_Management Guide-R03

C HAPTER 5 | Interface Configuration
Port Configuration
– 198 –
3. Select an interface from the Port or Trunk list.
4. Enter the sample name, the interval, and the number of buckets
requested.
5. Click Apply.
Figure 41: Configuring a History Sample
To show the configured entries for a history sample:
1. Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
2. Select Show from the Action menu.
3. Select an interface from the Port or Trunk list.
Figure 42: Showing Entries for History Sampling
To show the configured parameters for a sampling entry:
1. Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
2. Select Show Details from the Action menu.
3. Select Status from the options for Mode.
4. Select an interface from the Port or Trunk list.
5. Select an sampling entry from the Name list.