ECS4660-28F_Management Guide-R03

C HAPTER 51 | IP Routing Commands
Border Gateway Protocol (BGPv4)
– 1895 –
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
192.168.0.3 4 200 166 168 0 0 0 02:45:00 1
Total number of neighbors 1
Console#
show ip
community-list
This command shows routes permitted by a community list.
SYNTAX
show ip community-list [1-99 | 100-500 | community-list-name]
1-99 – Standard community list number that identifies one or more
groups of communities.
100-500 – Expanded community list number that identifies one or
more groups of communities.
community-list-name – Name of standard or expanded access list.
(Maximum length: 32 characters, no spaces or other special
characters)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip community-list rd
Named Community standard list rd
permit 100:10
Console#
show ip
extcommunity-list
This command shows routes permitted by an extended community list.
SYNTAX
show ip extcommmunity-list [1-99 | 100-500 |
community-list-name]
1-99 – Standard community list number that identifies one or more
groups of communities.
100-500 – Expanded community list number that identifies one or
more groups of communities.
community-list-name – Name of standard or expanded access list.
(Maximum length: 32 characters, no spaces or other special
characters)
COMMAND MODE
Privileged Exec