ECS4660-28F_Management Guide-R03

C HAPTER 51 | IP Routing Commands
Border Gateway Protocol (BGPv4)
– 1894 –
EXAMPLE
Console#show ip bgp route-map rd
BGP table version is 0, local router ID is 192.168.0.2
Status codes: s suppressed, d damped, h history, * valid, > best, i internal,
r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
*> 10.1.1.68 0 0 300 ?
Console#
show ip bgp scan This command shows BGP scan status.
SYNTAX
show ip bgp scan
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip bgp scan
BGP scan is running
BGP scan interval is 60
Current BGP nexthop cache:
10.10.10.64 valid [IGP metric 0]
BGP connected route:
10.10.10.0/24
10.10.11.0/24
Console#
show ip bgp
summary
This command shows summary information for all connections.
SYNTAX
show ip bgp summary
COMMAND MODE
Privileged Exec
EXAMPLE
In the following example, “Up/Down” refers to the length of time the
session has been in the Established state, or the current status if not in
Established state.
Console#show ip bgp summary
BGP router identifier 192.168.0.2, local AS number 100
RIB entries 0
Peers 1
Peer groups 0