ECS4660-28F_Management Guide-R03

C HAPTER 51 | IP Routing Commands
Border Gateway Protocol (BGPv4)
– 1892 –
show ip bgp paths This command shows all paths in the database.
SYNTAX
show ip bgp paths
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip bgp paths
Address RefCnt ASpath
0x331dad0:0 1
0x331d850:93 1 600
0x331d8d8:249 2 200 300
Console#
show ip bgp
prefix-list
This command shows routes matching the specified prefix-list.
SYNTAX
show ip bgp prefix-list list-name
list-name – Name of a prefix-list. The prefix list can be used to filter
the networks to import or export as defined by the match ip address
prefix-list command. (Range: 1-80 characters)
COMMAND MODE
Privileged Exec
Foreign host/port IP address and TCP port of the neighbor BGP speaker.
Nexthop IP address of next system via which packets are forwarded to the
destination network.
Read thread The read status for the socket connection with this neighbor.
Write thread The write status for the socket connection with this neighbor.
Table 274: show ip bgp - display description (Continued)
Field Description
Table 275: show ip bgp paths - display description
Field Description
Address Internal address in memory where the path is stored.
Refcnt The number of routes using this path.
ASpath The autonomous system path for this route.