ECS4660-28F_Management Guide-R03

C HAPTER 51 | IP Routing Commands
Routing Information Protocol (RIP)
– 1749 –
Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing:
Default version control: send version by interface set,receive version by
interface set
Interface Send Recv
VLAN1 1-compatible 1 2
Routing for Networks:
10.0.0.0/24
Routing Information Sources:
Gateway Distance Last Update Bad Packets Bad Routes
10.0.0.2 120 00:00:13 0 0
The maximum number of RIP routes allowed: 7872
Distance: Default is 120
Console#
show ip rip This command displays information about RIP routes and configuration
settings. Use this command without any keywords to display all RIP routes.
SYNTAX
show ip rip [interface [vlan vlan-id]]
interface - Shows RIP configuration settings for all interfaces or for
a specified interface.
vlan-id - VLAN ID. (Range: 1-4094)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip rip
Codes: R - RIP, Rc - RIP connected, Rs - RIP static,
C - Connected, S - Static, O - OSPF
Network Next Hop Metric From Interface Time
Rc 192.168.0.0/24 1 VLAN1 01:57
Console#show ip rip interface vlan 1
Interface: vlan1
Routing Protocol: RIP
Receive RIPv1 and RIPv2 packets
Send RIPv1 Compatible
Passive interface: Disabled
Authentication mode: (None)
Authentication string: (None)
Split horizon: Enabled with Poisoned Reverse
IP interface address: 192.168.0.2/24
Console#