ECS4660-28F_Management Guide-R03

C HAPTER 43 | Multicast Filtering Commands
MVR for IPv4
– 1479 –
mvr This command enables Multicast VLAN Registration (MVR) globally on the
switch. Use the no form of this command to globally disable MVR.
SYNTAX
[no] mvr
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
COMMAND USAGE
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
If MVR must be configured for an IGMP version 1 host, the multicast
groups must be statically assigned using the mvr vlan group command.
EXAMPLE
The following example enables MVR globally.
Console(config)#mvr
Console(config)#
mvr
associated-profile
This command binds the MVR group addresses specified in a profile to an
MVR domain. Use the no form of this command to remove the binding.
SYNTAX
[no] mvr domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR
group addresses. (Range: 1-21 characters)
DEFAULT SETTING
Disabled
show mvr members Shows information about the current number of
entries in the forwarding database, or detailed
information about a specific multicast address
PE
show mvr profile Shows all configured MVR profiles PE
show mvr statistics Shows MVR protocol statistics for the specified
interface
PE
Table 192: Multicast VLAN Registration for IPv4 Commands (Continued)
Command Function Mode