ECS4660-28F_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 147 –
RP Address 843
Add Sets a static address for an RP and the associated multicast
group(s)
843
Show Shows the static addresses configured for each RP and the
associated multicast groups
843
RP Candidate 845
Add Advertises the switch as an RP candidate to the BSR for the
specified multicast groups
845
Show Shows the multicast groups for which this switch is advertising
itself as an RP candidate to the BSR
845
Show Information 847
Show BSR Router Displays information about the BSR 847
Show RP Mapping Displays the active RPs and associated multicast routing entries 848
PIM6 PIM for IPv6 849
General Enables PIM globally for the switch 849
Interface Enables PIM per interface, and sets the mode to dense or sparse 850
Neighbor Displays information neighboring PIM routers 856
SM 856
Configure Global Configures settings for register messages, and use of the SPT 856
BSR Candidate Configures the switch as a BSR candidate 858
RP Address 859
Add Sets a static address for an RP and the associated multicast
group(s)
859
Show Shows the static addresses configured for each RP and the
associated multicast groups
859
RP Candidate 861
Add Advertises the switch as an RP candidate to the BSR for the
specified multicast groups
861
Show Shows the multicast groups for which this switch is advertising
itself as an RP candidate to the BSR
861
Show Information 863
Show BSR Router Displays information about the BSR 863
Show RP Mapping Displays the active RPs and associated multicast routing entries 865
Snyc
PTP Configures clock synchronization for the local network 594
Configure Global Sets the PTP clock synchronization domain, and the preference
level used in selecting the master clock; and adjusts the system
time based information in received Sync messages
595
Configure Interface Sets the timing parameters used in message exchange, and the
transport method for protocol messages; and enabled PTP per port
598
Show PTP Information Shows configured and protocol negotiated settings 602
Show Foreign Master Shows PTP announcements from neighbors 607
Table 6: Switch Main Menu (Continued)
Menu Description Page