ECS4660-28F_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 146 –
Show Information Shows statistics for each area, including SPF startups, ABR/ASBR
count, LSA count, and LSA checksum
804
Area Range 805
Add Configures route summaries to advertise at an area boundary 805
Show Shows route summaries advertised at an area boundary 805
Modify Modifies route summaries advertised at an area boundary 805
Redistribute 807
Add Redistributes routes from one routing domain to another 807
Show Shows route types redistributed to another domain 807
Modify Modifies configuration settings for redistributed routes 807
Summary Address 809
Add Aggregates routes learned from other protocols for advertising
into other autonomous systems
809
Show Shows configured summary addresses 809
Interface 811
Show Shows area ID and designated router settings for each interface 811
Configure by VLAN Configures OSPF protocol settings and authentication for specified
VLAN
811
Configure by Address Configures OSPF protocol settings and authentication for specified
interface address
811
Show MD5 Key Shows MD5 key ID used for each area 811
Virtual Link 817
Add Configures a virtual link through a transit area to the backbone 817
Show Shows virtual links, neighbor address, and state 817
Configure Detailed Settings Configures detailed protocol and authentication settings 817
Show MD5 Key Shows the MD5 key ID used for each neighbor 817
Information 820
LSDB Shows information about different OSPF Link State
Advertisements (LSAs)
820
Neighbor Shows information about each OSPF neighbor 823
PIM 833
General Enables PIM globally for the switch 833
Interface Enables PIM per interface, and sets the mode to dense or sparse 834
Neighbor Displays information neighboring PIM routers 839
SM 840
Configure Global Configures settings for register messages, and use of the SPT 840
BSR Candidate Configures the switch as a BSR candidate 842
Table 6: Switch Main Menu (Continued)
Menu Description Page