ECS4660-28F_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 145 –
Neighbor Address 778
Add Configures the router to directly exchange routing
information with a static neighbor
778
Show Shows adjacent hosts or interfaces configured as a neighboring
router
778
Redistribute 779
Add Imports external routing information from other routing domains
(that is, protocols) into the autonomous system
779
Show Shows the external routing information to be imported from other
routing domains
779
Distance 781
Add Defines an administrative distance for external routes learned
from other routing protocols
781
Show Shows the administrative distances assigned to external routes
learned from other routing protocols
781
Interface 782
Add Configures RIP parameters for each interface, including send and
receive versions, authentication, and method of loopback
prevention
782
Show Shows the RIP parameters set for each interface 782
Modify Modifies RIP parameters for an interface 782
Statistics
Show Interface Information Shows RIP settings, and statistics on RIP protocol messages 786
Show Peer Information Displays information on neighboring RIP routers 787
Reset Statistics Clears statistics for RIP protocol messages 788
OSPF Open Shortest Path First (Version 2) 788
Network Area 790
Add Defines OSPF area address, area ID, and process ID 790
Show Shows configured areas 790
Show Process Show configured processes 790
System 793
Configure Configures the Router ID, global settings, and default information 793
Show Shows LSA statistics, administrative status, ABR/ASBR, area
count, and version number
796
Area
Configure Area 798
Add Area Adds NSSA or stub 798
Show Area Shows configured NSSA or stub 798
Configure NSSA Area Configures settings for importing routes into or exporting routes
out of not-so-stubby areas
799
Configure Stub Area Configures default cost, and settings for importing routes into a
stub
802
Table 6: Switch Main Menu (Continued)
Menu Description Page