ECS4660-28F_Management Guide-R03

C HAPTER 41 | Class of Service Commands
Priority Commands (Layer 3 and 4)
– 1402 –
show qos map
dscp-cos
This command shows the internal DSCP to egress CoS map, which converts
internal PHB/Drop Precedence to CoS values.
SYNTAX
show qos map dscp-cos interface interface
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
COMMAND MODE
Privileged Exec
COMMAND USAGE
This map is only used if the packet is forwarded with a 8021.Q tag.
EXAMPLE
Console#show qos map dscp-cos interface ethernet 1/5
Information of Eth 1/5
dscp-cos map:
phb: drop precedence 0(green) 1(red) 3(yellow)
-------------------------------------------------------
0 : (0,0) (0,0) (0,0)
1 : (1,0) (1,0) (1,0)
2 : (2,0) (2,0) (2,0)
3 : (3,0) (3,0) (3,0)
4 : (4,0) (4,0) (4,0)
5 : (5,0) (5,0) (5,0)
6 : (6,0) (6,0) (6,0)
7 : (7,0) (7,0) (7,0)
Console#
show qos map
dscp-mutation
This command shows the ingress DSCP to internal DSCP map.
SYNTAX
show qos map dscp-mutation interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
COMMAND MODE
Privileged Exec