ECS4660-28F_Management Guide-R03

C HAPTER 41 | Class of Service Commands
Priority Commands (Layer 2)
– 1391 –
EXAMPLE
The following example shows how to set a default priority on port 3 to 5:
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#
RELATED COMMANDS
show interfaces switchport (1203)
show queue mode This command shows the current queue mode.
SYNTAX
show queue mode interface
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show queue mode ethernet 1/1
Unit Port queue mode
---- ---- ---------------
1 1 Weighted Round Robin
Console#
show queue weight This command displays the weights used for the weighted queues.
SYNTAX
show queue mode interface
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
COMMAND MODE
Privileged Exec