ECS4660-28F_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 133 –
Configure Interface Enables Web Authentication for individual ports 367
Network Access MAC address-based network access authentication 368
Configure Global Enables aging for authenticated MAC addresses, and sets the time
period after which a connected MAC address must be
reauthenticated
371
Configure Interface 372
General Enables MAC authentication on a port; sets the maximum number
of address that can be authenticated, the guest VLAN, dynamic
VLAN and dynamic QoS
372
Link Detection Configures detection of changes in link status, and the response
(i.e., send trap or shut down port)
374
Configure MAC Filter 375
Add Specifies MAC addresses exempt from authentication 375
Show Shows the list of exempt MAC addresses 375
Show Information Shows the authenticated MAC address list 377
HTTPS Secure HTTP 378
Configure Global Enables HTTPs, and specifies the UDP port to use 378
Copy Certificate Replaces the default secure-site certificate 380
SSH Secure Shell 381
Configure Global Configures SSH server settings 384
Configure Host Key 385
Generate Generates the host key pair (public and private) 385
Show Displays RSA and DSA host keys; deletes host keys 385
Configure User Key 387
Copy Imports user public keys from TFTP server 387
Show Displays RSA and DSA user keys; deletes user keys 387
ACL Access Control Lists 389
Configure Time Range Configures the time to apply an ACL 391
Add Specifies the name of a time range 391
Show Shows the name of configured time ranges 391
Add Rule 391
Absolute Sets exact time or time range 391
Periodic Sets a recurrent time 391
Show Rule Shows the time specified by a rule 391
Configure ACL 395
Show TCAM Shows utilization parameters for TCAM 394
Add Adds an ACL based on IP or MAC address filtering 395
Show Shows the name and type of configured ACLs 395
Table 6: Switch Main Menu (Continued)
Menu Description Page