ECS4660-28F_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 130 –
STA Spanning Tree Algorithm
Configure Global
Configure Configures global bridge settings for STP, RSTP and MSTP 276
Show Information Displays STA values used for the bridge 281
Configure Interface
Configure Configures interface settings for STA 282
Show Inform at on Displays interface settings for STA 286
MSTP Multiple Spanning Tree Algorithm 289
Configure Global 289
Add Configures initial VLAN and priority for an MST instance 289
Show Configures global settings for an MST instance 289
Modify Configures the priority or an MST instance 289
Add Member Adds VLAN members for an MST instance 289
Show Member Adds or deletes VLAN members for an MST instance 289
Show Information Displays MSTP values used for the bridge
Configure Interface 293
Configure Configures interface settings for an MST instance 293
Show Information Displays interface settings for an MST instance 293
Traffic
Rate Limit Sets the input and output rate limits for a port 295
Storm Control Sets the broadcast storm threshold for each interface 296
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
298
Configure Global Sets the time to apply the control response after traffic has
exceeded the upper threshold, and the time to release the control
response after traffic has fallen beneath the lower threshold
300
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a
response of rate limiting, or to send related SNMP trap messages
301
Priority
Default Priority Sets the default priority for each port or trunk 305
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
306
Trust Mode Selects DSCP or CoS priority processing 312
DSCP to DSCP 314
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
314
Show Shows the DSCP to DSCP mapping list 314
CoS to DSCP 316
Configure Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
316
Table 6: Switch Main Menu (Continued)
Menu Description Page