ECS4660-28F_Management Guide-R03

C HAPTER 31 | Interface Commands
Interface Configuration
– 1200 –
DEFAULT SETTING
Shows historical statistics for all interfaces, intervals, ingress traffic, and
egress traffic.
COMMAND MODE
Privileged Exec
COMMAND USAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Showing Port or
Trunk Statistics" on page 192.
EXAMPLE
This example shows the statistics recorded for all named entries in the
sampling table.
Console#show interfaces history ethernet 1/1
Interface : Eth 1/ 1
Name : 1min
Interval : 1 minute(s)
Buckets Requested : 15
Buckets Granted : 15
Status : Active
Current Entries
Start Time Octets Input Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 02:50:52 15059355 80275 43750 2304
Discards Errors Unknown Proto
------------- ------------- -------------
0 0 0
Octets Output Unicast Multicast Broadcast
--------------- ------------- ------------- -------------
84493398 106787 47232 1158
Discards Errors
------------- -------------
0 0
Interface : Eth 1/ 1
Name : 15min
Interval : 15 minute(s)
Buckets Requested : 96
Buckets Granted : 11
Status : Active
Current Entries
Start Time Octets Input Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 02:45:07 116003318 616894 336491 17899
Discards Errors Unknown Proto
------------- ------------- -------------
0 0 0