ECS4660-28F_Management Guide-R03

C HAPTER 30 | Access Control Lists
IPv6 ACLs
– 1175 –
DEFAULT SETTING
None
COMMAND MODE
Interface Configuration (Ethernet)
COMMAND USAGE
If a port is already bound to an ACL and you bind it to a different ACL, the
switch will replace the old binding with the new one.
EXAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#ipv6 access-group standard david in
Console(config-if)#
RELATED COMMANDS
show ipv6 access-list (1175)
Time Range (957)
show ipv6
access-group
This command shows the ports assigned to IPv6 ACLs.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ipv6 access-group
Interface ethernet 1/2
IPv6 standard access-list david in
Console#
RELATED COMMANDS
ipv6 access-group (1174)
show ipv6
access-list
This command displays the rules for configured IPv6 ACLs.
SYNTAX
show ipv6 access-list {standard | extended} [acl-name]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
COMMAND MODE
Privileged Exec