ECS4660-28F_Management Guide-R03

C HAPTER 28 | Authentication Commands
Secure Shell
– 1062 –
ip ssh timeout This command configures the timeout for the SSH server. Use the no form
to restore the default setting.
SYNTAX
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
DEFAULT SETTING
10 seconds
COMMAND MODE
Global Configuration
COMMAND USAGE
The timeout specifies the interval the switch will wait for a response from
the client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the exec-timeout
command for vty sessions.
EXAMPLE
Console(config)#ip ssh timeout 60
Console(config)#
RELATED COMMANDS
exec-timeout (925)
show ip ssh (1065)
delete public-key This command deletes the specified user’s public key.
SYNTAX
delete public-key username [dsa | rsa]
username – Name of an SSH user. (Range: 1-8 characters)
dsa – DSA public key type.
rsa – RSA public key type.
DEFAULT SETTING
Deletes both the DSA and RSA key.
COMMAND MODE
Privileged Exec