Web Management Guide-R06

Chapter 18 | Configuring Router Redundancy
Configuring VRRP Groups
– 698 –
Web Interface
To configure VRRP:
1. Click IP, VRRP.
2. Select Configure Group ID from the Step List.
3. Select Add from the Action List.
4. Enter the VRID group number, and select the VLAN (i.e., IP subnet) which is to
be serviced by this group.
5. Click Apply.
Figure 459: Configuring the VRRP Group ID
To show the configured VRRP groups:
1. Click IP, VRRP.
2. Select Configure Group ID from the Step List.
3. Select Show from the Action List.
Figure 460: Showing Configured VRRP Groups
To configure the virtual router address for a VRRP group:
1. Click IP, VRRP.
2. Select Configure Group ID from the Step List.
3. Select Add IP Address from the Action List.