CLI Reference Guide

Chapter 12 | Link Aggregation Commands
– 439 –
Syntax
show mlag group mlag-id
mlag-id – MLAG identifier. (Range: 1-1000)
Example
Console#show mlag group 1
Domain ID: 1
Local Member: Eth 1/5
Local State: Inactive
Remote State: Inactive
Console#
show mlag domain The command shows MLAG domain settings.
Command Mode
Privileged Exec
Syntax
show mlag domain domain-id
domain-id – Domain identifier. (Range: 1-16 characters)
Example
Console#show mlag domain 1
Peer Link : Eth 1/1
MLAG List : 10,20,33-35
Console#