ECS4510 Series CLI Reference Guide-R03

Chapter 2 | Using the Command Line Interface
CLI Command Groups
– 89 –
Console(config)#end
Console#show ip igmp snooping mrouter
VLAN M'cast Router Ports Type
---- ------------------- -------
1 Eth 1/11 Static
Console#
CLI Command Groups
The system commands can be broken down into the functional groups shown
below
.
Table 6: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
93
System Management Display and setting of system information, basic modes of
operation, maximum frame size, file management, console
port and telnet settings, system logs, SMTP alerts, the system
clock, and switch clustering
101
Simple Network
Management Protocol
Activates authentication failure traps; configures community
access strings, and trap receivers
185
Remote Monitoring Supports statistics, history, alarm and event groups 209
Flow Sampling Used with a remote sFlow Collector to provide an accurate,
detailed and real-time overview of the types and levels of
traffic present on the network
217
User Authentication Configures user names and passwords, command privilege
levels, logon access using local or remote authentication,
management access through the web server, Telnet server
and Secure Shell; as well as port security, IEEE 802.1X port
access control, and restricted access based on specified IP
addresses, and PPPoE Intermediate Agent
223
General Security Measures Segregates traffic for clients attached to common data ports;
and prevents unauthorized access by configuring valid static
or dynamic addresses, web authentication, MAC address
authentication, filtering DHCP requests and replies, and
discarding invalid ARP responses
289
Access Control List Provides filtering for IPv4 frames (based on address, protocol,
TCP/UDP port number or TCP control code), IPv6 frames
(based on address, DSCP traffic class, or next header), or non-
IP frames (based on MAC address or Ethernet type)
371
Interface Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
399
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port trunks
431
Power over Ethernet
*
Configures power output for connected devices 445
Mirror Port Mirrors data to another port for analysis without affecting the
data passing through or the performance of the monitored
port
451