ECS4510-28F_Quick Start Guide-R03

Quick Start Guide

– 2 –

Note:

For detailed switch installation information, refer to the Installation Guide,

which is on the Documentation CD included with the switch.

Note:

For Safety and Regulatory information, refer to the Safety and Regulatory

Information document included with the switch.

1. Unpack the Switch Unpack the switch and check the package contents.

◆ L2 Stackable Gigabit Ethernet Switch

ECS4510-28T, ECS4510-28P, ECS4510-28F, ECS4510-28F-DC, ECS4510-52T, or

ECS4510-52P

◆ Rack Mounting Kit — includes two brackets and eight screws

◆ Four adhesive foot pads

◆ DC connector plug (ECS4510-28F-DC only)

◆ Power cord — either US, Continental Europe or UK

◆ Console cable (RJ-45 to DB-9)

◆ Documentation — Quick Start Guide and Regulatory and Safety Information

◆ Documentation CD—includes Installation Guide, Web Management Guide, and

CLI Reference Guide

2. Install the Switch The switch can be mounted in a standard 19-inch rack or on a desktop or shelf.

Following your rack plan, mark the holes in the rack where the switch will be

installed. Lift the switch into the rack and hold it in a position aligned with the

marked holes. Secure the switch in the rack, using four rack-mounting screws (not

provided).

Attach the brackets to the switch.

Use the screws supplied with the rack to secure the switch in the rack.