Installation Guide
Table Of Contents
- ECS4210-28T/P Installation Guide
- How to Use This Guide
- Contents
- Figures
- Tables
- Switch Description
- Installation Overview
- Switch Chassis
- Power and Grounding
- Port Connections
- Switch Management
- Troubleshooting
- Index
– 9 –
1 Switch Description
This chapter includes these sections:
◆ “Overview” on page 9
◆ “Key Technical Specifications” on page 12
Overview
Thank you for choosing the ECS4210-28T or ECS4210-28P switch system. These
switches are built with leading-edge technology to deliver reliable high-
performance connectivity for your data network.
The ECS4210-28T and ECS4210-28P are Gigabit Ethernet Layer 2 switches with 24
10/100/1000BASE-T ports, and four Small Form Factor Pluggable (SFP) transceiver
slots for fiber connectivity.
The switches include an SNMP-based management agent, which provides both in-
band and out-of-band access for managing the switch. Further, the switches
support both web and CLI-based configuration.
Power-over-Ethernet All of the 10/100/1000 Mbps ports on the ECS4210-28P support both the IEEE
802.3af-2003 and IEEE 802.3at-2009 PoE standards that enable DC power to be
supplied to attached devices using wires in the connecting Ethernet cable.