CLI Reference Guide-R03

Chapter 4 | System Management Commands
Switch Clustering
– 148 –
rcommand This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id member-id
member-id - The ID number of the Member switch. (Range: 1-36)
Command Mode
Privileged Exec
Command Usage
◆ This command only operates through a Telnet connection to the Commander
switch. Managing cluster Members using the local console CLI on the
Commander is not supported.
◆ There is no need to enter the username and password for access to the Member
switch CLI.
Example
Console#rcommand id 1
CLI session with the ECS4210-28T is opened.
To end the CLI session, enter [Exit].
Vty-0##
show cluster This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role : commander
Interval Heartbeat : 30
Heartbeat Loss Count : 3 seconds
Number of Members : 1
Number of Candidates : 2
Console#