Installation Guide
Table Of Contents
- ECS4210-28T/P Installation Guide
- How to Use This Guide
- Contents
- Figures
- Tables
- Switch Description
- Installation Overview
- Switch Chassis
- Power and Grounding
- Port Connections
- Switch Management
- Troubleshooting
- Index
Chapter 3
| Switch Chassis
Switch Cooling Requirements
– 23 –
Switch Cooling Requirements
Wherever the switch is located, be sure to pay close attention to switch cooling
requirements. The location should be well ventilated and provide unrestricted air
flow at the front, back, and sides of the switch. If the air flow is insufficient, it may
cause the switch to overheat and possibly fail.
The ECS4210-28T uses a fanless cooling design. The following figure shows the
convective airflow into and from the ECS4210-28T switch.
Figure 11: ECS4210-28T Switch Cooling
The ECS4210-28P is equipped with 3 cooling fans. The following figure shows the
cool air intake and the hot air exhaust airflow into and from the ECS4210-28P
switch.
Figure 12: ECS4210-28P Switch Cooling